top of page
  • Writer's pictureRAZR Ice Augers

Early Summer: Replace Your RAZR Ice Auger Blades Now

Early Summer is the perfect time to get ahead on your ice fishing preparations! In this simple guide, we'll show you how to replace the blades on your RAZR Ice Auger, ensuring your gear is ready for the winter season.

Factory Packaged RAZR Ice Auger Blades

Before you know it, the winter months will be here and it will be time to hit the ice. Don't wait until the last minute to check on your gear - replacing the blades on your RAZR Ice Auger now will save you time and hassle later.

With just an 8mm wrench and this easy-to-follow guide, you can replace the blades and ensure your auger is in top condition for your next ice fishing trip. Read on for step-by-step instructions on how to replace your RAZR Ice Auger blades.

  1. Begin by removing the blade cover and set the auger on a level surface like a work bench. Make sure the auger doesn't slip during this process.

  2. Using the 8mm wrench, loosen and remove the two bolts holding each blade in place.

  3. Take the old blades off and set them aside in a safe place.

  4. Take the new blades and place them onto the auger, making sure that the bolt holes line up with the holes on the auger.

  5. Insert the bolts and tighten them down with the 8mm wrench.

  6. Repeat this process for the other blade.

  7. Once both blades are in place and secure, replace the blade cover.

  8. Before using your auger, make sure to test it out to ensure that the blades are properly aligned and tightened.

By replacing your RAZR Ice Auger blades in the early summer months, you'll be ready for a successful and safe ice fishing season with one less thing to do. Don't forget to pack an extra set of blades and an 8mm wrench in your ice fishing gear bag for quick and easy replacements on the go. Proper maintenance and care will keep your RAZR Ice Auger in great condition for many winters to come.


bottom of page